We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
EWP115 Nylon Kit Remote Electric Water Pump (12V)
SKU:
EWP8025
Details
EWP®115 Nylon Kit Remote Electric Water Pump (12V)
The EWP®115 (115L/min.) pump is suitable for small, medium, large, high- performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.
The EWP®115 is a practical alternative to the mechanical belt-driven pump or fitted as an auxiliary pump. Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Our EWP range are also extensively used in Intercooler Applications.
Kit Contents
| PART DESCRPTION | UNITS |
|---|---|
| EWP®115 Nylon 12V | 1 |
| EWP® Basic Wiring Harness | 1 |
| Hose Clamps | 2 |
| RED - Wire Joiner | 1 |
| RED - 6mm Ring Terminal | 1 |
| RELAY - 12V 40 Amp 5 Pin W/- Resistor Protection | 1 |
| SCREW - SELF TAP 8X3/8 BZ | 1 |
Technical Specifications
| Voltage | 12 Volt Pump |
| Operating voltage | 3V DC to 15V DC |
| Maximum Current | 10A @ 13V |
| Flow rate (max) | 139 L/min (36.7 US gal/min) @ 13V DC |
| Operating temp. | -40° to 120°C (-40° to 248°F) |
| Pump design | Clockwise centrifugal with volute chamber |
| Pump weight | 920 grams (2.03 lb) |
| Pump material | Nylon 66 - 30% Glass Filled |
| Burst pressure | 500 kPa (72.5 psi) |
| Seal | Ceramic face seal |
| Self Priming | No, none of our pumps are self-priming |
| Fits hose sizes | 35mm to 51mm (1⅜” to 2”)Push on Fittings |
| Push-On fitting Size | EWP Inlet & Outlet 38mm |
EWP & CONTROLLER INSTALLATION DEMONSTRATION
Combined with an LCD EWP®/Fan Digital Controller (Sold separately Part #8002 or EWP® Combo Pack) will manage both the EWP® and Thermatic® fan operation. The Digital Controller will vary the speed of the EWP® in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic® Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life. The EWP® Controller Combo Pack is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.
The world’s most advanced total engine cooling management system:
universal fit
more power
more cooling
increase fuel efficiency
extend engine life
world-leading technology
Technical specifications
| Manufacturer | EWP |
|---|