We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
EWP115 Alloy Combo Remote Electric Water Pump & Controller (12V)
SKU:
EWP8950
Details
EWP®115 Alloy Combo Remote Electric Water Pump & Controller (12V)
Take total control of your engine cooling with the Davies Craig EWP®115 Alloy Electric Water Pump and LCD EWP®/Fan Digital Controller. The Controller will also manage the operation of your Thermatic® Fan.
The EWP®115 pump is suitable for small, medium, large, high-performance and 4WD vehicles. It improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy. Our EWP range are also extensively used in Intercooler Applications.
COMBO CONTENTS
| PART DESCRIPTION | UNITS |
|---|---|
| EWP®115 Alloy | 1 |
| EWP®/Fan Digital Controller & Mounting Plate + Bracket | 1 |
| Sensor Thermal - coolant temp - ¼" NPT thread | 1 |
| Adaptor - Nylon - In Line, 38mm (2 x 1/4" NPT) | 1 |
| 1/4" NPT Nylon - Bung | 1 |
| Wiring Harness | 1 |
| Hose Clamps | 4 |
| SCREW - SELF TAP 8X3/8 BZ | 1 |
| BLUE 6mm Ring Terminal | 1 |
TECHNICAL SPECIFICATIONS
| EWP115 Alloy ELECTRIC WATER PUMP | LCD Controller | |||
|---|---|---|---|---|
| Operating voltage | 3V DC to 15V DC | Voltage range | 12V DC to 29V DC | |
| Maximum current | 10A @ 13V | Display LCD size | 64.6mm (2.54”) x 55.6mm (2.19”) | |
| Flow rate (max) | 139 L/min (36.7 US gal/min) @ 13V DC | Maximum current | 12Amps | |
| Operating temp. | -40° to 120°C (-40° to 248°F) | Warning alarm | High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit | |
| Pump design | Clockwise centrifugal with volute chamber | Targeted (set) temperatures | Singular degrees from: 40°C (104°F) to 110°C (230°F) | |
| Pump weight | 920 grams (2.3 lb) | Memory | Set & targeted temperature | |
| Pump material | Aluminium (Powder Coated) | Fan cut-in temp. | 3°C (5.4°F) above the targeted (set) temperature | |
| Burst pressure | 500 kPa (72.5 psi) | Controller type | PCB with micro-processor | |
| Seal | Ceramic face seal | Sensor type | Thermister in housing | |
| Self Priming | No, none of our pumps are self-priming | |||
| Fits hose sizes & Internal Fitting | 35mm to 51mm (1.38” to 2”) -Inlet & Outlet: -16AN ORB | Overrun/ shutdown | -10°C (14°F) below set/target temperature or 3 minutes | |
| Indicators | Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm) | Push-On fitting Size | EWP Inlet & Outlet 38mm with 3mm Sleeve (#8510) 44mm with 6mm Sleeve (#8511) 51mm | |
| Weight | 100 grams (3.5 oz) | Dimensions | Length = 98mm (3.8") Width = 95mm (3.7") Depth = 25mm (1”) | |
Combined with an LCD EWP®/Fan Digital Controller (Sold separately Part #8002 or EWP® Combo Pack) will manage both the EWP® and Thermatic® fan operation. The Digital Controller will vary the speed of the EWP® in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic® Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life. The EWP® Controller Combo Pack is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.
Technical specifications
| Manufacturer | EWP |
|---|