Johnson Waterpump

The Johnson C090 is a robust circulation pump with mechanical shaft seal and brush motors, designed for continuous operation. This water pump is ideally suited for applications in motorsport, recreational vehicles, buses and mobile vehicles.

Ideal for circulating water/antifreeze in heating systems for cars, boats, recreational vehicles etc. and for circulating versus water in vehicles.

• Flow rate of 100 litres / minute at 0.1 bar; 67 l/m at 0.25 bar.
• Shaft seal: mechanical seal
• Water and dust protected (IP67) 12V DC motor (nominal voltage 13.6V) for continuous operation.
• The permanently lubricated, ball-bearing brush motor is designed for an operating time of approx. 3,000 hours.
• Non-self-priming, requires flooded suction
• The pump must not run dry!
• liquid: versus water or a water/glycol mixture with a maximum of 60% glycol; temperature range: -30°C to +100°C
• Ambient temperature: -30°C to +70°C
• Maximum system pressure: 2.0 bar
• Mounting: Flat mounting bracket included
• Connection: For Ø38 mm (1-1/2") hose inner diameter.
• Current 7.4A; fuse 10A
• Dimensions: Height 11.0 cm from base plate (total 11.6 cm) / Width 11.7 cm / Length 21.1 cm / Weight: 1.75kg