Newton In-Line Pressure Release Valve Ø8.0mm to Ø8.0mm End Fittings.

In-Line
Pressure Release Valve (Pos. Pressure 50MBar/ Neg. Pressure 5.5MBar), Ø8.0mm to
Ø8.0mm End Fittings.

The TPV8
In-Line valve is acceptable for use in general automotive, including fuel
injected, applications. The new TPV8 in-line valves are built to prevent
standing gas losses when the vehicle is stopped. The in-line valve will open
when fuel is being drawn from the tank. It will then shut once the flow of fuel
stops. If there is a pressure build-up in the tank - such as a hot car with a
full tank of fuel exposed to strong sunlight - the valve will open to release
the excess pressure. It will then close once the excess pressure is released. The
TPV8 valve can be mounted at any angle.

Specifications:

Fixing Arrangement:   Ø8.0mm Standpipes

Applications:   Standard Fuels, Oil & Water Tanks   

Compatibilities:   Operation Temperature -40°C to +80°C       

Finish:   Anodised Red

Weight:   30.0 grams  

Pressure Limits:   Positive Pressure
0.0055 Bar (0.08 psi) Negative Pressure 0.05 Bar (0725 psi)  

Valve Placement:   Any direction (Arrow
pointing away from the tank)

 

Materials:

Bodies:   Aluminium Alloy
6082/T6    

O-Ring:   Viton A (FPM or FKM)

Internal Floatation Ball:   Nylon

Washer:   Stainless Steel 316   

Retention:   Stainless Steel A2
Type   



Dimensions:

Outside Diameter A:   31.0mm

Height B:   89.0mm

Bolts Circle Diameter C:   8.0mm Spigot

 Depth D:   8.0mm Spigot