• Gratis verzending vanaf 100 euro
  • Gratis verzending vanaf 100 euro
  • Professioneel advies
  • Fysieke 1000 m2 showroom

Direct deskundig advies? 0183 40 34 00

🡠 Terug | Home / Default Category / Automotive / Interieur / Heaters / Midi Heater 5 kw with Side Outlets 12v

MIDI HEATER 5 KW WITH SIDE OUTLETS 12V

This 5kw Midi heater is our new mid-size offering, this size of heater is perfectly suited to medium sized vehicles, commercial & agricultural vehicle cabins, marine applications and many more!

Specifications:

- 2.8kg
- 12v / 5.9a / 71w
- 3 Speed Fan via internal resistor pack
- 300m3/hr (175cfm) Airflow
- 2.5mm Thick aluminium case construction
- 16mm (5/8”) Hose connections
- Aluminium Heater Core
- ON/OFF Water Valve – Cable operated
- 4x 51mm (2”) Air Outlets

PLEASE NOTE:

- This heater is not available without the water valve.
- The water valve is not a bypass design, when in the OFF position no water will flow back to the engine, therefore this heater is unsuitable for use on a vehicle which also uses the heater circuit as the engines thermostat bypass circuit. If your engine has no thermostat bypass circuit you have two options: (A) Retrofit a thermostat bypass water circuit though not always possible, or (B) clamp the valve on the heater fully open so it cannot move and then install or use the original heater bypass valve.
- This is not a stand-alone heater system; you will need to provide a hot water supply by plumbing your heater to your vehicles engine cooling system or a hot water heater manufactured by companies such as Eberspacher, Webasto or Mikuni.
- This is not a complete kit. We would recommend the following additional items: 4 Position Fan Switch, Rotary Heater Control Knob, Bowden Cable, Water Hose, Air Ducting, Air Vents etc. We can supply all parts mentioned above and more. We do not offer packaged kits as everybody’s requirements are different and there are never two installations the same!
- Please make sure that no foreign matter can be ingested into the fan, this is the quickest way to destroy blower motors and could potentially cause a fire. For example, this is particular important if the heater unit is installed onto or close to the floor of the vehicle. A filtered cover may be required to protect the blower and ensure long operation life.
Merk
LTEC
Artikelnummer
LTECHEAT50

€224,00

Incl. 21% BTW

AANTAL
Artikelnummer LTECHEAT50

MIDI HEATER 5 KW WITH SIDE OUTLETS 12V

This 5kw Midi heater is our new mid-size offering, this size of heater is perfectly suited to medium sized vehicles, commercial & agricultural vehicle cabins, marine applications and many more!

Specifications:

- 2.8kg
- 12v / 5.9a / 71w
- 3 Speed Fan via internal resistor pack
- 300m3/hr (175cfm) Airflow
- 2.5mm Thick aluminium case construction
- 16mm (5/8”) Hose connections
- Aluminium Heater Core
- ON/OFF Water Valve – Cable operated
- 4x 51mm (2”) Air Outlets

PLEASE NOTE:

- This heater is not available without the water valve.
- The water valve is not a bypass design, when in the OFF position no water will flow back to the engine, therefore this heater is unsuitable for use on a vehicle which also uses the heater circuit as the engines thermostat bypass circuit. If your engine has no thermostat bypass circuit you have two options: (A) Retrofit a thermostat bypass water circuit though not always possible, or (B) clamp the valve on the heater fully open so it cannot move and then install or use the original heater bypass valve.
- This is not a stand-alone heater system; you will need to provide a hot water supply by plumbing your heater to your vehicles engine cooling system or a hot water heater manufactured by companies such as Eberspacher, Webasto or Mikuni.
- This is not a complete kit. We would recommend the following additional items: 4 Position Fan Switch, Rotary Heater Control Knob, Bowden Cable, Water Hose, Air Ducting, Air Vents etc. We can supply all parts mentioned above and more. We do not offer packaged kits as everybody’s requirements are different and there are never two installations the same!
- Please make sure that no foreign matter can be ingested into the fan, this is the quickest way to destroy blower motors and could potentially cause a fire. For example, this is particular important if the heater unit is installed onto or close to the floor of the vehicle. A filtered cover may be required to protect the blower and ensure long operation life.
Merk
LTEC
Artikelnummer
LTECHEAT50

€224,00

Incl. 21% BTW

AANTAL
Artikelnummer LTECHEAT50

MIDI HEATER 5 KW WITH SIDE OUTLETS 12V

€224,00

Incl. 21% BTW
This 5kw Midi heater is our new mid-size offering, this size of heater is perfectly suited to medium sized vehicles, commercial & agricultural vehicle cabins, marine applications and many more!

Specifications:

- 2.8kg
- 12v / 5.9a / 71w
- 3 Speed Fan via internal resistor pack
- 300m3/hr (175cfm) Airflow
- 2.5mm Thick aluminium case construction
- 16mm (5/8”) Hose connections
- Aluminium Heater Core
- ON/OFF Water Valve – Cable operated
- 4x 51mm (2”) Air Outlets

PLEASE NOTE:

- This heater is not available without the water valve.
- The water valve is not a bypass design, when in the OFF position no water will flow back to the engine, therefore this heater is unsuitable for use on a vehicle which also uses the heater circuit as the engines thermostat bypass circuit. If your engine has no thermostat bypass circuit you have two options: (A) Retrofit a thermostat bypass water circuit though not always possible, or (B) clamp the valve on the heater fully open so it cannot move and then install or use the original heater bypass valve.
- This is not a stand-alone heater system; you will need to provide a hot water supply by plumbing your heater to your vehicles engine cooling system or a hot water heater manufactured by companies such as Eberspacher, Webasto or Mikuni.
- This is not a complete kit. We would recommend the following additional items: 4 Position Fan Switch, Rotary Heater Control Knob, Bowden Cable, Water Hose, Air Ducting, Air Vents etc. We can supply all parts mentioned above and more. We do not offer packaged kits as everybody’s requirements are different and there are never two installations the same!
- Please make sure that no foreign matter can be ingested into the fan, this is the quickest way to destroy blower motors and could potentially cause a fire. For example, this is particular important if the heater unit is installed onto or close to the floor of the vehicle. A filtered cover may be required to protect the blower and ensure long operation life.
Merk
LTEC
Artikelnummer
LTECHEAT50

AANTAL
Artikelnummer LTECHEAT50